This Guide will go over how to setup your Montavue Go 2.0 App on your phone so that you can view your Cameras remotely. Take note that any devices that will be added must have an internet connection in order to be viewed remotely.
1. Download the Montavue Go 2.0 App
-
iOS Users: Visit the App Store and search for Montavue Go 2.0. Tap Download.
-
Android Users: Open the Google Play Store, search for Montavue Go 2.0, and install the app.
2. Launch the App & Decide on Account Setup
-
Open the app after installation.
-
You will be asked if you would like to receive notifications, click allow here to allow your phone to send the notification. You will need to enable the notifications in another section within the app to tell the NVR which type of notifications you want to receive.
-
Select the Region you are in for the App
-
You’ll be prompted to create an account (optional). Here’s what you need to know:
-
Account Benefits: Required for devices like the Doorbell. However:
-
Devices added to an account are bound to the email used.
-
Sharing a device with another user requires manually sharing access to their email.
-
When you create an account follow the prompts on the screen and input the code needed from the email you use to finish the account setup process.
-
Local vs. Account: Adding a device locally (no account) lets you recover its password later—a feature unavailable with account-linked devices.
3. Add Your Device to the App
Follow these steps to connect your camera, NVR, or doorbell:
Step 1: Tap the "+" Icon
-
Go to the Devices tab on the bottom left hand corner of the screen
-
Tap the plus sign in the top-right corner.
Step 2: Scan or Enter the Device’s SN
-
Choose Scan QR Code (use your camera to scan the device’s QR code) or
-
Select Manual Entry - You will need to select the type of device you are adding 1st and then you will be able to input the devices SN to continue the setup.
Step 3: Skip the Security Code
-
When prompted for a Security Code, leave it blank and proceed.
Step 4: Choose Local or Account Storage
-
Select Add Local (recommended for password recovery) or
-
Select Add to Account (required for doorbells and shared access).
Step 5: Confirm Device Type
-
For WiFi cameras: Ensure the device’s hotspot is enabled (you’ll hear an audio prompt). You can follow the guides for wifi based products in our other blogs.
-
The app may auto-detect your device type. Verify it matches your hardware.
Step 6: Name Your Device & Enter Credentials
-
Assign a custom name (e.g., “Front Door Camera”).
-
Enter the device’s Username and Password (same as your NVR/device login).
Step 7: Enable UPNP
-
On the UPNP Setup screen this will already be enabled. Tap OK to finalize the connection.
4. You’re All Set!
-
Your device will now appear in the Devices tab.
-
Tap to view live feeds, adjust settings, or review recordings.
Troubleshooting & Tips
-
Forgot Password? Local devices allow password recovery via the app. Click the 3 dots next to your NVR and go to device details. From here click the square in the top right-hand corner, here you can click on the password section and click the eyeball to view your password.
Enjoy seamless monitoring with Montavue Go 2.0! 📱✨
