How to Hide Security Camera Wires Outside: The Definitive Guide

It can be tough to hide the wires for your security camera.

 

But don’t worry, we’re here to help.

 

In this article, we’ll show you how to hide security camera wires outside so that your system looks professional and neat.

 

First, let’s take a look at where to hide the wires for your security cameras. The most common places to hide security camera cables are underground or behind gutters.

 

If you’re hiding the wires behind gutters, you’ll need to choose a wire cover that is durable and weather-resistant.

 

The type of wire cover you choose will depend on the location of the security cameras and the type of wire cover that is used.

 

So let's dive in and take a closer look at the best ways to hide security camera wires outside.

 

How to Hide Security Camera Wires Outside

Hiding the wires for your security camera can be a challenge, but it's important to do so in order to protect them from the elements.

 

By using one of the methods mentioned below, you can keep your wires hidden and protected from your surveillance camera.

Cover The Wires

If your security cameras are located outside, then it may be helpful to blend the wires with your landscaping.

 

One way to do this is to bury the wires underground. This will keep the wires hidden and out of sight. You can also use wire covers to blend the security camera cables into your landscaping.

 

There are a variety of wire covers available that are made to look like rocks or plants that you can hide wires inside.

Paint Over the Wires

If you don’t want to bury the wires, you can try painting over them. This is a good option if the wires are visible against a light-colored surface.

 

To paint over the wires, you’ll need to use a color that closely matches the color of the surface.

 

You can also use a clear coat of paint to protect the wires from the elements.

Use Gutter Guards

If your security cameras are mounted on the gutters, then you can use gutter guards to hide the security cameras wires. Gutter guards are available in a variety of colors and styles to match your home’s exterior.

 

You can also use gutter guards to blend the hanging wires into your landscaping.

Plastic Tubing For Wires

If you’re looking for an inexpensive way to hide your wires, then you can use a plastic tube. This is a good option for short runs of wire.

 

Cut a length of tubing that is long enough to run wires. Then, use a heat gun to shrink the tubing so that it fits snugly around the cables inside.

 

This will protect the camera wires from the elements and keep them hidden from view.

Use Electrical Tape

If you have a short run of wire that needs to be hidden, then you can use electrical tape. This is a good option for small sections of wire.

 

First, clean the area around the wires with alcohol. This will help the tape to stick better.

 

Then, wrap the tape around the wires. Be sure to cover the entire length of the security systems wires.

Use Cable Ties

Cable ties are another good option for short runs of security cables. They are easy to use and they come in a variety of colors.

 

First, clean the area around the camera wires with alcohol. This will help the tie to stick better.

 

Then, wrap the cable tie around the camera wires. Be sure to cover the entire length of the security system wires.

Determining Where to Hide Security Camera Wires Outside

The first step is to determine where you’re going to hide security camera wires. One of the most common places to hide them is underground or behind gutters.

 

If you’re hiding the wires behind gutters, you’ll need to choose a wire cover that is durable and weather-resistant.

 

If you’re burying the wires underground, you’ll need to choose a wire that is rated for underground use. You can find the underground wire at your local hardware store.

Installing Your Wire Cover

Once you have your wire cover, you’ll need to install it. The process will vary depending on the type of wire cover you’ve chosen.

 

If you’re using a wire cover that is made to look like rocks or plants, you’ll need to follow the instructions that come with the cover.

 

If you’re using gutter guards, all you need to do is follow the manufacturer’s instructions.

 

If you’re using plastic tubing, you’ll need to heat the tubing so that it shrinks around the wires. You can use a heat gun or a hair dryer for this.

 

Once the tubing is shrunk, you can trim it so that it’s the same length as the wires.

 

If you’re using electrical tape, you’ll need to wrap it around the wires. Be sure to cover the entire length of the wires.

 

If you’re using cable ties, you’ll need to wrap them around the wires, ensuring you cover the entire length.

 

Cut and attach the wire cover to the cameras according to the manufacturer’s instructions.

 

Finalize the installation by testing the cameras to make sure they are working properly.

Frequently Asked Questions

How Do You Hide Exposed Wires Outside?

Exposed wires can be unsightly and dangerous. If you have wires that need to be hidden outside, there are a few options available.

 

One option is to use a wire conduit. This is a tube made of metal or plastic that the wires can be run through. Another option is to bury the wires underground.

 

This option is more labor-intensive, but it will completely disguise the wires. If you need to hide wires that are already in place, you can use wire molding.

 

This is a strip of plastic or metal that covers the wires and can be painted to match the color of your house.

How Do You Hide Wires Around a Window?

If you have wires that need to be hidden around a window, there are a few options available. One option is to use wire molding.

 

This is a strip of plastic or metal that covers the wires and can be painted to match the color of your house. Another option is to use electrical tape.

 

You can also use cable ties to hide the wires. This is a good option for short runs of wire. They are easy to use and they come in a variety of colors.

 

First, clean the area around the wires with alcohol. This will help the tie to stick better. Then, wrap the cable tie around the wires.

 

Be sure to cover the entire length of the wires.

How Do You Organize CCTV Wires?

If you have a CCTV system, you likely have a lot of wires that need to be organized. One way to do this is to use a wire management system.

 

This is a system of plastic or metal clips that you can use to route the wires in an orderly fashion. Another option is to use cable ties.

This is a good option for short runs of wire. They are easy to use and they come in a variety of colors.

Conclusion

Installing security cameras can provide peace of mind, but hiding the wires can be a challenge. In this article, we have provided a number of tips for hiding the wires so that they are not visible.

 

We have also discussed where to hide the wires and how to install the wire cover. By following these tips, you can ensure that your security cameras are hidden and working properly.

 

Do you have any other tips to hide security camera wires?