The MNR12082-8 8 channel NVR is equipped with an incredible Quad-Core embedded processor capable of recording 4K resolution video in real time (30 frames per second) on all 8 channels. 4K resolution brings greater details to your video, and allows you to utilize the extra resolution when you need to identify finer details, such as faces and license plates. 8MP 4K resolution is 3840 x 2160 pixels vs. 2MP 1920 x 1080 pixels, the more pixels gives you the ability to have further digital zoom, without pixelating the image as much.

When it comes to simplicity, Montavue has made it so simple that you just need to plug the included Cat5e ethernet cable with each camera into this NVR, and the other end into the camera, wait a minute or two and the camera will be auto recognized and pop up on your screen. The PoE simplicity is perfect, as both power and video are transferred through the same cable. It also gives you flexibility with installation. You can run one single cable from the NVR up to 300ft, and then if you need to go further you can hook a PoE switch up and you can run it an additional 300ft for a total of 600ft. Each one of our Montavue cameras come with a 100ft cat5e cable.

With IP cameras the fun doesn’t stop there. You can bring in cameras to your NVR that are plugged in from around the world as long as they have internet access. This gives you limitless capability, and with the ONVIF compatibility of these cameras (all Montavue cameras are ONVIF compatible which means), you can use them on ONVIF compatible software and recorders. For plug and play compatibility we recommend Montavue IP cameras.

With the Montavue 4K NVR's you are able to record your security footage in four ways, and using a different setting on each camera. First you have continuous recording to your hard drive, this gives you continuous coverage with no gaps, but uses the most hard drive storage. Second, you can schedule the cameras to record only during certain times, for example when you leave for work or away from home. Third, you can set up motion detection and the NVR will only record when the camera senses that motion. This advanced 4K NVR uses a pre-recording function that allows you to record up to 5 seconds before the motion was detected, so you don't miss the moments before the motion. Lastly, you can use advanced IVS features such as tripwire, intrusion, and more to initiate recording.

All of these settings are individual to each camera, giving you the ability to have some set as continuous in high-traffic areas, and some scheduled, while the rest are motion. This allows you to maximize your storage capacity.

With the MNR12082-8 Montavue NVR and Montavue IP cameras, you have the ability to create very distinct motion detection zones. This gives you complete control over the alerts you receive on your phone, or record to your NVR. This advanced feature from Montavue allows you to only view and record the things that matter most. Each individual zone has its own sensitivity levels and thresholds. Gives you the power to fine-tune the zones to your exact liking and minimize false notifications from pets.

The MNR12082-8 4K NVR is equipped with top of the line H.265 video compression. Compression is what helps minimize the storage needed to store your video and also reduces the bandwidth needed to send video through the network and to your mobile device. With H.265 compression, you can save up to 50% of storage compared to traditional H.264 compression. Or you can save up to 2x as much video when compared to H.264 with the same amount of storage used. Additionally, it increases the speed at which video transmits through the network and to your mobile device as they are smaller files.

• H.265 compression reduces the amount of storage by 50% compared to traditional H.264 compression
• H.265 compression reduces the file size which in turn increases the speed at which you receive video on your mobile devices and takes up less bandwidth on your network

This 4K NVR can enhance your video recordings by adding audio alongside (listen-in audio camera required). The MNR12082-8 supports audio on all channels using the same ethernet cable that transmits your power and video. No need to run a separate cable. You can enable audio, and record it to your NVR for live listen and view, or playback.

The Montavue MNR12082-8 IP camera recording unit comes with a 2TB pre-installed surveillance grade hard drive made by either WD or Seagate. The hard drives we use are specifically designed to function under heavy use. They are designed to write and read constantly and allow you to view playback at the same time it is recording new footage. If you need additional storage, you can replace the included 2TB SATA hard drive with another SATA HD up to 10TB, and you have a slot to insert another hard drive up to 10TB, for a total capacity of 20TB.

At Montavue, we believe that when you buy one of our products you are going to love it, and if you have any issues with it you will bring it to our attention. We will walk you through it with our US-based tech support, or we will send you a replacement device if something is wrong with the item. We are confident products we sell are going to exceed your expectations, but in the event you still want to return the item, you have 60 days from your purchase date to send it back for a full refund. Please see our 60-day return policy for more details